Agilent IDP-3 - NEW

Starting at $0
In stock
Only %1 left
Weight 21 lbs
Pumping Speed 3.0 m3/h
Ultimate Pressure 3.3 x 10-1 mbar

Agilent IDP-3 Dry Scroll Vacuum Pump - NEW

The Agilent IDP-3 dry scroll pump is an innovative, compact, high-performance, oil-free vacuum pump that is suitable for a wide variety of applications. It is the smallest scroll pump made for general vacuum applications, which makes it easy to integrate into OEM systems, and it weighs only 21 pounds (9.5 kg). Yet with a pumping speed of 60 l/m and a very low base pressure of 250 milliTorr, it is the highest-performing dry pump in its class.

  •  Oil-free - no contamination of the vacuum system
  •  Hermetic design with fully isolated motor and bearings
  •  Low noise and vibration
  •  No mechanisms subject to catastrophic failure
  •  Lower base pressure than diaphragm pumps
  •  Speed control on 24 VDC motor with 0-10V control signal
  •  Hour meter is standard on all IDP-3 units

Questions? Please call our toll free number at 866-332-0500 or send an email to our sales team!

Peak pumping speed 60 Hz/24 VDC: 60 L/min (3.6 m3/h) 50 Hz: 50 L/min (3.0 m3/h)
Media No corrosive, explosive or particulate forming gases
Ultimate pressure

3.3 x 10-1 mbar (2.5 x 10-1 Torr)

Max. inlet pressure 1.0 atmosphere (0 psig)
Max. outlet pressure at nom voltage 1.4 atmosphere (6.5 psig)
Inlet connection NW16
Exhaust connection Female, 0.25 inch, national pipe thread (10 mm hose barb provided installed)
Gas ballast Female, 0.25 inch, national pipe thread (shipped with gas ballast port plug installed; 20 µm sintered filter provided)
Ambient operating temperature 5 to 40°C (41 to 104°F)
Storage temperature –20 to 60°C (–4 to 140°F)
Motor rating 0.16 hp (120 W)
Operating voltages

100-120; 200-240 VAC, 50/60 Hz, single-phase, 3 to 6A typical

Motor thermal protection Automatic thermal protection
Operating speed

60 Hz/24 VDC: 3,200 rpm

50 Hz: 2,600 rpm

Cooling system Air-cooled
Weight Pump only: 9.5 kg (21 lbs), shipping weight: 10.5 kg (23 lbs)
Dimensions (H x W x L mm) 181 x 140 x 358
Leak rate (with exhaust sealed) < 1 x 10-6 sccs (1 x 10-6 mbar.l/s)
Noise level 55 dB (A)
Vibration level at inlet 5 mms-1 rms
Hour meter Integral hour meter provided
Emissions and immunity EN 61236-1:2013 as a Class A device
Safety EN/IEC 61010 3rd Edition certified
Materials Body, flanges, foreline, baffle – stainless steel
Jet assembly – stainless steel
Body cooling coils – copper
Quick cooling coil – stainless steel
Cold cap – nickel-plated copper
Weight 21 lbs


Type Label Description Download
Agilent IDP-3 - NEW Instruction Manual Download

Need modifications to this item? PTB Sales' expert team of engineers can configure products to your specific needs.

Agilent IDP-3 Dry Scroll Vacuum Pump - NEW

IDP3A01           single-phase, 220 V, 50/60 Hz                
IDP3A21           1-phase, 220-230 V, 50/60 Hz, w/ isolation valve                
IDP3B01           1-phase, 115 V, 60 Hz                
IDP3B21           1-phase, 115 V, 60 Hz, w/ isolation valve                
IDP3C01           1-phase, 100 V, 50/60 Hz