Advanced Energy Pinnacle 12kW 208V 3152412-106
Call for Price
USED Advanced Energy AE Pinnacle 12kW 208V DC Magnetron Power Supply 3152412-106
The power supply remote is sold separately as an option.
The output connectors are available as in Appendix A of the manual but are purchased separately as options.
Microprocessor Advantages
The internal microprocessor checks for proper circuit operation while supervising all operating parameters. System diagnostics run when the unit is initially powered up. The most recent power settings and conditions (such as output production) are retained in non-volatile memory.
Displays
The displays on the passive panels as well as the control panels show power, current, or voltage levels. (The displays show levels for unit A and unit B if this is a dual unit). They also display information about output, setpoint, interlock, bus fault, over temperature, arcs, and error codes.
Arc-Suppression Feature
With the Pinnacle's arc-handling feature enabled, the hard-arc detection time is less than 1µs, and delivered are energy is less than 10 mJ for a kW inverter. (Depending on your unit's output configuration, the energy could be significantly less than 10 mJ).
Additionally, the arc-suppression feature enables you to implement preprogrammed arc-handling functions during your normal process cycle and your target conditioning cycle (TCC). In this mode the arc detect time and arc shutdown time are fixed by target type (metal or nonmetal). But you may also customize your arc shutdown and arc detect delay times by selecting the custom mode. Other parameters, including long arc count limit and voltage trip level, arc selectable through the Pinnacle Remote Active Panel or serial communications (Host) port.
Questions? Please call our toll free number at 866-332-0500 or send an email to our sales team!
| Input voltage | 200/208, 400 or 480 VAC (all ±10%) 3-phase, 4 wire, 50 to 60 Hz, no neutral required |
| Efficiency | > 90% |
| Power factor | 0.90 for loads > 1.2 kW |
| Output voltage | Low Z, standard Z or high Z |
| Output polarities | Floating default with positive and negative capability |
| Output ripple voltage | The component of output ripple voltage related to input line frequency is < 5% RMS |
| Output power repeatability | 0.1% from 10% to 100% of rated power (from run to run at a constant set point) |
| Remote panel or host port | ±1% of full-rated output |
| User port | 1% or ±0.2% of full-rated output, whichever is greater |
| Line regulation | 1% for 10% line voltage change or ±2% frequency change |
| Load regulation | ±1% for 4:1 load change within V-1 limits of tap range |
| Temperature coefficient | < 0.005%/°C variation in the regulated output parameter over 20° to 40°C (68° to 104°F) ambient temperature range |
| Product line (overall) | Specification accuracy is Cpk < 1.5 |
| Analog interface options | 37-pin isolated (to 500 VRMS), 0 to 10 VDC analog, 0/24 VDC digital 37-pin, 0 to 10 VDC analog, 0/15 VDC digital 37-pin, 0 to 5 VDC analog, 0/15 VDC digital |
| Serial communication options | RS-232, RS-422, RS-485 (selectable baud rates up to 57.6k) Profibus (selectable baud rates of 1.5 or 12 MB); AE Bus protocol DeviceNet option available |
| Output power connector | Three-terminal, multi-contact, pluggable connector (with shielded or plastic strain relief), UHF, military or ring lug |
| Input power connector | Five-terminal, DIN compression connector |
Need modifications to this item? PTB Sales' expert team of engineers can configure products to your specific needs.
USED Advanced Energy AE Pinnacle 12kW 208V DC Magnetron Power Supply 3152412106 / 3152412-106
