Brooks Automation MagnaTran 7 - SERVICE

Call for a repair service quote.

Brooks Automation MagnaTran 7 Robot Refurbishment - Scope of Work

• Perform an incoming visual check for obvious shipping damage. If found contact customer representative immediately.
• Rebuild/replace T1-Axis, T2-Axis, Z-Axis motors.
• Rebuild Z-axis linear guide.
• Rebuild Z-axis lead nut.
• Inspect, test and replace T1 & T2 encoders/read heads as needed.
• Inspect, test and replace home sensors.
• Replace all bearings.
• Replace O-rings.
• Rebuild of bi-symmetric arm set.
• Axes encoder calibrations.
• Firmware will remain the same as incoming to retain configuration files.
• Perform vacuum leak testing.
• Dynamic repeatability testing of wafer cycling for 24 hours.

Refurbishment is recommended for robots over 5 years old.