Consumable parts vary with model type. Pricing is determined by model configuration, oil type and hard parts damage.
Tuthill Kinney KT 500D - Scope of Work
PTB Sales will perform the following:
1. Incoming Inspection
- Attach work order to pump
- Picture taken of mechanical configuration
2. Receipt and Inspection
- Complete decontamination of internal and external parts
- Hazardous materials disposed in accordance with environmental regulations
- Motor test
3. All parts are cleaned and inspected
- High pressure parts washer
- Corncobb blaster
- Glass blaster
- Check hinge bar bore
4. Parts are dimensionally evaluated
5. Rebuild
- Clean water jacket
- Install freeze plugs
- Lap eccentrics and hinge bars
- Replace shaft seals
- Replace bearings
- Replace drive belts
- Replace O-rings
- Replace valves and springs
- Install new gaskets
6. Final Test
- 24 hour burn in test
- Verify ultimate pressure and current
- Verify no leaks
7. Packaging and Shipping
- Paint pump
- Apply all safety and startup labels
- Test reported completed
- QC report created
- Package pump and ship
We found other products you might like!
Request an RMA Return Material Authorization
Procedures for shipping used equipment to PTB Sales:
- Seal off the exhaust and inlet of the pump.
- Attach our pump declaration form to the equipment to declare what contaminants the equipment has been exposed to.
There is a $300 Evaluation Fee. This gets applied to the cost of repair.
Questions? Please call our toll free number at 866-332-0500 or send an e-mail to our sales team!
